Written by Admin and published on https://chainsawacademy.husqvarna.com/
A leaner–a tree pushed over in a heavy wind or an improperly felled tree–deserves your utmost respect as it may fall on a person with lethal results. A leaner exemplifies an accident ready to happen and needs fixing as soon as possible. While multiple methods of cutting down a leaner abound, unfortunately only one or two techniques work well enough to use safely. Remove a leaner with the help of a friend and follow all safety procedures.
HOW TO REMOVE A HANG-UP TREE
If you accidentally fell a tree into another – always start by taking a break and thinking through the situation calmly. Removing a trapped tree is always a hazardous undertaking and there is no need to rush. Choose the safest solution to the problem even if it takes longer. There are several options. Do not be afraid to call for help – your safety is more important than anything else.
Below are two methods that you can use to easily bring down a hung-up tree – as long as it is not too big or too entangled in the second tree. But first let’s take a quick look at recommended tools and some very important safety rules.
Tools
These are tools that will come in handy when removing a hung-up tree:
• Turning strap
• Turning hook. Often comes with the breaking bar.
• Winch (advanced, not covered in this topic)
• Forwarders or tractors fitted with grapple loader or winch (advanced, not covered in this topic)
Safety first!
Working with or close to hung-up trees can be very dangerous. Never leave a trapped tree unmarked. Mark the area with highly visible marking tape if you must leave the area to get other tools or assistance.
Rolling the tree method
Slightly leaning hang-ups are usually easy to roll down. Use the turning hook or turning strap if you think that the tree is not too stuck. Here’s how to do it.
1. Asses the tree
Assess the tree to decide in which way the tree can be rolled down.
2. Adjust the hinge
You need to adjust the hinge to make is possible to roll down the tree. Start with sawing off the middle of the hinge so that two corners are saved. Then cut off the corner on the opposite side from the direction in which you intend to roll down the tree. Cut this corner with repeated saw cuts diagonally from above. Make sure to leave the corner on the same side that you intend to roll down the tree.
3. Roll down the tree
Take the turning hook (or use the turning strap to attach a branch as a lever) and roll the tree away from you. Lift straight with a straight back and knees bent. If the tree is large or has hung really tightly, you can increase the rolling force by using the turning hook or turning strap with a longer piece from a thin tree.
Step down method
Severely leaning hang-ups can be difficult to roll down, and must be levered or pulled backward. The method is based on removing the tree from the stump or the place where the tree is stuck with the butt end in the ground. The trunk should have a good sliding surface and fall off cleanly.
Be aware that the trunk could sever too early – never stand in the direction of movement or under the trunk.
It is important that the two saw cuts are not made too high up on the trunk as it could “fold down” at the breaking point. If the tree is too tightly hung, you should use a tractor, winch or other machine.
Here’s how to perform the step down method.
1. Create a slider bed
2. Make the backside cut
3. Place a wedge
4. Saw the front side cut
5. Knock the wedge
6. The hung-up tree slides backwards
7. If needed, lever with a pole
8. If needed, repeat the process
Original post here https://ift.tt/3uJ5lye.
from AAA Tree Lopping Ipswich https://ift.tt/3wVOM3B
via IFTTT
No comments:
Post a Comment